Skip to main content

Offline Operation Guide

The accessory box of the TOOCAA L2 includes a TF card, so no additional preparation is required.

Creating a Sample Project​

Step 1/5​

Insert the TF card into the computer using a card reader. After completing the design in TOOCAA Studio or LightBurn, save the design file to the TF card in Gcode format.

Note:The Gcode file name must be in English, and there should be only one file on the TF card.

Step 2/5​

Insert the TF card into the slot with the metal contacts facing upward.

Step 3/5​

Turn on the power switch.

Step 4/5​

Click the button to preview the laser module's working area. Based on the previewed working area, adjust the aluminum plate and basswood board to the appropriate position.

Step 5/5​

Once the laser module's previewed working area aligns with the appropriate position of the basswood board, close the smart protective cover, double-click the button, and the TOOCAA L2 will start working.